Power Adapter (12V DC - 1A)

Compact and reliable 12 V DC power adapter designed for powering electronic boards, controllers, modules, and other low-voltage equipment requiring a regulated 12 V supply. The adapter accepts a universal mains input of 100–240 V AC, 50–60 Hz, making it suitable for use in most countries when paired with the appropriate mains plug.

The output provides up to 12 V DC at 1 A, corresponding to a maximum output power of 12 W. This makes the adapter suitable for low-power control electronics, driver boards, test equipment, communication modules, and other devices operating from a 12 V input.

A standard 5.5 mm DC barrel plug allows direct connection to compatible power sockets. The connector uses centre-positive polarity, with the inner contact connected to positive and the outer sleeve connected to negative.

The adapter can be used with our electronic boards that feature a 12 V DC input and a compatible 5.5 mm barrel socket. Before connecting the adapter, always confirm that the board requires 12 V DC, uses centre-positive polarity, and does not draw more than 1 A.

Integrated protection against short circuits, over-voltage, over-current, and overheating helps protect both the adapter and the connected equipment during abnormal operating conditions. The approximately 90 cm output cable provides practical flexibility when positioning the power supply around laboratory equipment, enclosures, and test setups.

Typical Applications:

• Powering 12 V electronic boards and control modules
• Laboratory and experimental electronics
• MOSFET driver boards and switching modules
• Microcontroller and interface circuits
• Low-power test equipment and instrumentation
• LED controllers, communication modules, and small electronic devices
• Replacement power supply for compatible 12 V equipment

Technical Specification:

Important: Check the voltage, current requirement, polarity, and barrel connector dimensions of the connected device before use. The total load must not exceed 1 A or 12 W.